top of page
SiteGuard PID perimeter intrusion detection unit on a housing development, with scaffolding and roof trusses behind

Perimeter intrusion detection system for temporary sites: SiteGuard PID

Wireless, solar-powered units that detect at the boundary, photograph the intruder and sound the alarm.

SiteGuard PID is a wireless, solar-powered perimeter intrusion detection system you can deploy around a site in hours and move as the boundary changes. Each unit detects movement up to 15m either side. When it does, it takes three photographs, sounds an alarm and flashes a red strobe, and sends the pictures to the SiteGuard monitoring station within seconds. Place units along the fence line and you have a detection perimeter that identifies and deters an intruder before they reach the compound.

SiteGuard PID perimeter intrusion detection unit with solar panel and red strobe beside a site dumper on a construction site

What is a PIDS?

A PIDS, or perimeter intrusion detection system, is a line of sensors along a boundary that detects anyone crossing it and raises the alarm, giving a security team time to respond before an intruder reaches anything valuable. Permanent PIDS are built into the fencing at airports, prisons and power stations. SiteGuard PID brings the same idea to temporary sites: freestanding, solar-powered units that need no fence, no cabling and no mains, and can be picked up and re-sited in an afternoon as the boundary changes.

SiteGuard PID at a glance

One unit, repeated along your boundary as many times as the perimeter needs.

 

Each SiteGuard PID stands on its own: no fence to fix to, no cable to run, no power to connect. Set out about every 30m, they form an unbroken detection line around a compound, a cable route or a whole site. Every unit has its own solar panel, battery and 4G/5G connection, so if one is moved, the rest keep working.

 

We work out how many you need, and where they go, when we survey the site.

SiteGuard PID unit with solar panel and red strobe on site, with a JCB access platform behind

SiteGuard PID

Detection range

15m each side of the unit

On detection

Three photographs, audible alarm, red strobe

Alert

Photos to the monitoring station and app within seconds

Power

Solar with battery, three days without sun

Connectivity

4G/5G

Deployment

Freestanding, no fence or cabling required

Units per site

Sized to your perimeter at survey; as a rule of thumb one unit per 30m

Controls

Arm and disarm schedules via SiteGuard Monitoring or the app

What happens when a unit is triggered

Detect

The unit senses movement within 15m on either side. Analytics ignore animals, weather and passing traffic.

Capture

It takes three photographs of the zone in quick succession, so the operator has faces, clothing and direction of travel.

Deter

The alarm sounds and the red strobe flashes. Most intruders leave here, before anyone has to do anything.

Alert

The photos reach the monitoring station within seconds. If a tower is on site, its cameras turn to the zone; the operator verifies, issues a voice challenge and escalates to your keyholder if needed.

CCTV operator at a computer in a CCTV monitoring room

Where it works best

PIDs come into their own wherever a camera alone can’t see the whole boundary:

  • Long or irregular boundaries that a single camera can’t cover

  • Linear sites: highways schemes, pipelines, cable routes, rail possessions

  • Solar farms and wind farm compounds during construction

  • Quarries and aggregate yards with open perimeters

  • Plant yards and material stores

  • Phased housebuilding where the boundary moves every few weeks

  • Farms with remote buildings and open approach tracks

Close-up of a SiteGuard PID perimeter detection unit on a housing site, with scaffolding and roof trusses behind
Cameras and loudspeaker on a SiteGuard CCTV Tower

Detect at the fence, verify on the tower

PIDs on their own tell you someone has crossed the line and show you who. Paired with a SiteGuard trailer tower, the activation turns the tower’s cameras to the zone, the operator sees the photos and the live feed, and a voice challenge goes out before they reach anything worth taking. That combination is how SiteGuard protects a whole site rather than a single compound.

Included with every PID hire

A PID line is only as good as where the units sit, so we don’t drop them off and leave. Our engineers walk the boundary with you, design the perimeter, position each unit and trigger every zone before handover. One price covers everything below. If the boundary moves, we can come back and move the line, with relocation priced separately in your quote.

Site survey and perimeter design

Delivery and positioning

Detection zones set

24/7 monitoring

Walk-test before handover

Collection at the end of hire

Rapidly deployable PIDS: how quickly can you have a perimeter?

This is what “rapidly deployable” means in practice. Order before midday and across Hull, Beverley, York, Leeds, Grimsby and Scunthorpe the units are usually along your boundary the same day; anywhere else in the UK, within 24 hours. There’s no trenching, no fence fixing and no power to connect, so a 300m perimeter is surveyed, positioned and walk-tested in an afternoon. When the boundary moves, the line can move with it: we re-site the units and reset the zones, with relocation priced in your quote.

Perimeter intrusion detection: your questions answered

  • A PIDS watches the boundary; a CCTV tower watches an area. PID units sit along the fence line and raise the alarm the moment someone crosses it, photographing them as they do. A tower gives the operator a live, moving view of the compound and a speaker to challenge intruders. On their own, each covers part of a site. Together, the PIDs detect early and the tower verifies, which is why most larger sites use both.

  • No. SiteGuard PID units are freestanding and self-powered, so they can follow a fence line, a hoarding, a hedge or an open boundary with nothing to fix to. We position them at survey to give overlapping coverage, and because there’s no cabling, moving the line when the site changes takes an hour rather than a day.

  • Rarely, and never without a person checking first. Detection is filtered for people and vehicles, and every activation comes with three photographs, so the operator sees a fox or a flapping tarpaulin for what it is before doing anything. You won’t be woken up for wildlife.

  • It takes three photographs of the zone, sounds its alarm and flashes a red strobe. The photos reach the monitoring operator within seconds, so they can see whether it’s a person, a vehicle or an animal before deciding to issue a voice challenge through the nearest tower or call your keyholder. Most intruders leave at the alarm.

  • Yes. You can arm and disarm through the app, or set schedules through SiteGuard Monitoring so the perimeter arms itself at the end of the shift and stands down when the first person arrives. Overrides for weekend working or a late delivery are a phone call away.

  • It depends on the length and shape of the boundary. As a rule of thumb each unit covers a 30m stretch, so a 300m perimeter needs around ten, with extra units at corners, gateways and anywhere the line kinks. We size it at survey and quote for the exact number.

  • Yes. On sites next to occupied homes we can set the unit to silent detection, so it still photographs and alerts the operator but doesn’t sound or flash. The voice challenge from the tower does the deterring instead.

Protect the boundary, not just the compound

Tell us about the site and we’ll design the perimeter, working out how many units you need and where they should go. Quotes come back the same working day. Or call us to talk it through with someone who knows the kit.

bottom of page